All product details available for download below in CAD, PDF and RVT format.

/ DHS (Hi-Span) Purlin Details

The Dimond Hi-Span purlin range is available in 12 sizes from DHS 150/12 to DHS 400/20 to suit commercial applications from 5m to 18m spans. Speed of installation is assured as Hi-Span purlins and girts are supplied complete with brace channels ready for site assembly.

2.3.16.1-2.3.16.3. CAD Details-DHS Product 1

Contains the following:

DHS Purlin Profiles, DHS Portal Cleats, DHS Cleat Dimensions, DHS Standard Hole Locations, DHS Fastening to Cleats, DHS Elongated Holes Detail

2.3.16.4. - 2.3.16.7. CAD Details - DHS Product 2

Contains the following:

Standard Holes for DHS Purlins, Standard Holes for Lapped DHS, DHS Bolted Channel Bracing Layout, DHS Fastbrace Cleats, DHS Fastbrace Bracing Layouts

2.3.16.8. - 2.3.16.10. CAD Details - DHS Assemblies 1

Contains the following:

DHS Apex Detail, DHS Ridge Detail, DHS Eaves Detail 1, DHS Eaves Details 2, DHS Eaves Alternate Detail 1a, DHS Eaves Alternate Detail 2a

2.3.16.11. - 2.3.16.13. CAD Details - DHS Assemblies 2

Contains the following:

DHS Floor to Wall Detail Opt 1, DHS Floor to Wall Details Opt 2, DHS Roof Step Detail, DHS Hip Detail 1, DHS Hip Detail 2

2.3.16.14. - 2.3.16.15. CAD Details - DHS Assemblies 3

Contains the following:

DHS Valley Detail, DHS Trimmer Detail, DHS Lapped Span Detail

/ Top Notch Purlin Details

Dimond’s range of Top Notch purlins are compact, lightweight and easy to install.

2.4.11. Top Notch CAD Details

Contains the following:

Top Notch Purlin Profiles, Top Notch Strap Detail, Top Notch End Fixing Detail, Top Notch Internal Fixing Detail, Top Notch Lapped Span Detail

/ Flatdeck Details

Flatdeck is a versatile, lightweight composite steel flooring system that makes full use of the combined structural properties of both steel and concrete.

3.4.14.1. CAD Details - Flatdeck 1

Contains the following:

Flatdeck Profile, Flatdeck Side Lap Bearing on Steel Beam, Flatdeck End Bearing on Steel Beam, Flatdeck Internal Bearing on Steel Beam, Flatdeck Internal Step Down on Steal Beam Opt 1, Flatdeck Internal Step Down on Steel Beam Opt 2

3.4.14.2. CAD Details - Flatdeck 2

Contains the following:

Flatdeck Internal Set Down on Steel Beam, Flatdeck Side Lap on Steel Beam, Flatdeck on Masonry Block with Brick Veneer, Flatdeck on Masonry Block with Timber Wall, Flatdeck Internal Bearing on Masonry Block Wall, Flatdeck Side Lap Bearing on Masonry Block Wall, Flatdeck Side Lap Bearing on Tilt Slab, Flatdeck End Bearing on Tilt Slab  

/ Hibond 55 Details

Hibond 55 is a proven performer in the three key areas of strength, reliability and economy. Hibond is a versatile, lightweight system that delivers rapid and cost-effective installation saving on construction time.

3.3.14.1. - 3.3.14.2. CAD Details - Hibond 1

Contains the following:

HiBond Profile, HiBond 55 Internal Step Down On Steel Beam Opt 1, HiBond Side Lap Bearing on Steel Beam, HiBond End Bearing on Steel Beam, HiBond Internal Bearing on Steel Beam, Top Notch Internal Fixing Detail, HiBond Internal Step Down on Steel Beam Opt 2, HiBond Internal Step Down on Steel Beam Opt 3, HiBond Side Lap Bearing on Steel Beam Opt 1, HiBond Side Lap Bearing on Steel Beam Opt 2

3.3.14.3. - 3.3.14.4. CAD Details - HiBond 2

Contains the following:

HiBond Internal Set Down on Steel Beam Opt 1, HiBond Internal Set Down on Steel Beam Opt 2, HiBond on Block Brick Veneer, HiBond on Block Timber Wall, HiBond Internal Bearing for Block Wall, HiBond Side Lap Bearing on Block Wall Opt 1, HiBond Side Lap Bearing on Block Wall Opt 2, HiBond Side Lap Bearing on Tilt Slab, HiBond End Bearing on Tilt Slab